Questions about gel cleaning and Intelligent Gels.
A concise explanation of the technology, deployment and application approach.
Which industries could use Intelligent Gels technology?
Potential applications extend well beyond water and wastewater. Opportunity areas include oil and gas, chemicals and petrochemicals, food and beverage, pharmaceuticals, fuels, paints and coatings, resins, adhesives, mining, industrial processing and other industries that transport materials through pipelines.
Our starting point is not the industry itself but the problem: does something need to be cleaned, moved, recovered, separated or delivered in a controlled way?
Are all of the industry applications shown on the website commercially available today?
No. The Industries & Applications page deliberately includes both established areas of experience and potential future applications for gel technology.
New applications require appropriate development and validation, including material compatibility, process conditions, environmental requirements, regulation and the proposed recovery or disposal method.
Can Intelligent Gels develop a completely new gel for our problem?
Yes. Bespoke formulation and new-product development are an important part of our approach.
We start by understanding the required material behaviour and operating environment, then assess whether properties such as viscosity, density, flow, carrying capacity, contact time or biodegradability can be engineered around the challenge.
How do we start a new project with Intelligent Gels?
Start by telling us about the problem rather than trying to specify the gel.
Describe the material, equipment or pipeline involved, what currently happens, what is not working well and what outcome you would like to achieve. We can then assess whether an existing gel system is suitable or whether the opportunity justifies development of something new.
What is an innovative gel?
A viscous engineered material whose flow, carrying capacity and contact characteristics can be adjusted for a particular cleaning, movement, recovery or separation task.
How does gel cleaning differ from flushing?
Flushing relies primarily on water velocity. A viscous gel is designed to occupy more of the bore, maintain wall contact and carry entrained material within the gel mass.
Does the pipeline need to be piggable?
No rigid pig is required. Suitability still depends on the asset, access, valves, restrictions and the proposed entry/recovery route.
How is the gel moved?
The cleaning slug is propelled using a controlled carrier flow selected for the application, with pressure and operating limits agreed in the project method.
What happens to removed material?
The gel and captured material are recovered at a planned exit point so they can be inspected, handled and disposed of through the agreed route.
Can it be used in drinking-water mains?
Yes!
Can gel technology be used outside water?
Yes, potential opportunity areas include oil and gas, chemicals, food and beverage, pharmaceuticals, fuels, coatings, mining and other processes involving pipelines or batch/product handling. Each use requires its own compatibility and regulatory validation.
What types of deposits can gel cleaning remove?
Gel cleaning can be formulated around a range of accumulated materials including sediment, iron, manganese, sludge, grit and other pipeline deposits.
The first step is to understand the material present, the condition of the pipeline and the required cleaning outcome so that the gel properties and deployment method can be specified appropriately.
Can the gel be formulated for different applications?
Yes. One of the main advantages of gel technology is that properties such as viscosity, density, carrying capacity, flow behaviour and contact characteristics can be adjusted around the application.
This allows us to approach the gel as an engineered material rather than a single standard product.
What information do you need to assess a pipeline?
Useful starting information includes pipeline diameter, length, material, lining, operating pressure and flow, available access points, bends or restrictions and the material or deposits that need to be removed.
For operational pipelines, we also need to understand the available isolation window, recovery location and any return-to-service requirements.
How far can a gel travel through a pipeline?
There is no single standard distance because the required gel volume and behaviour depend on the pipeline diameter, length, geometry, flow conditions, access arrangements and material being transported.
Longer sections therefore require application-specific engineering rather than simply increasing the amount of gel.
Can gel cleaning be used in pipelines with bends and changes in diameter?
A major advantage of a viscous gel is its ability to conform to pipeline geometry rather than relying on a rigid mechanical pig.
Bends, fittings, valves and changes in bore still need to be assessed during project planning to confirm that the proposed deployment and recovery route is suitable.
What happens to the gel after cleaning?
The cleaning programme includes a planned recovery point where the gel and the material it has captured can be collected.
The recovered material can then be inspected and managed using the appropriate handling or disposal route for that particular application.
Does gel cleaning require specialist pipeline modifications?
Not necessarily. Wherever practical, the deployment method is developed around existing access such as hydrants, washouts, fittings or other suitable network connections.
The access arrangement is reviewed during the initial engineering assessment before a cleaning method is proposed.
Can gel technology help recover valuable product from process lines?
Potentially, yes. In industrial processes, residual product can remain within pipelines after transfer or between production batches.
An engineered gel may provide a way to displace and recover that material rather than washing it directly into a waste stream. The commercial benefit can be particularly significant where the material being recovered is valuable.
Can gels be used to separate different products or batches?
Batch separation is one of the wider applications we are exploring for engineered gels.
A gel can potentially form a controlled interface between different products moving through the same pipeline, helping reduce mixing at the product interface and improving the potential for recovery.
Have a question specific to your asset?
Send us the process and pipeline information and we will assess the application rather than trying to force-fit a generic answer.